Gas boiler and water heater repair in Batumi

Gas boiler repair and maintenance in Batumi: ignition, sensors, burner, heat exchanger, pump and diagnostics. We also do boiler hookup and preparation: electrics, pumps, getting the system ready for commissioning.

Common issues

  • • Boiler does not start or shuts off.
  • • Sensor and board errors.
  • • Weak hot water or heating.
  • • Leaks and pressure drops.
  • • On-site visits are available in Batumi city center, Khimshiashvili, New Boulevard, Boni, Airport area and Gonio; exact timing depends on address and technician load.

What we do

  • • Sensor, board, electrode and burner replacement.
  • • Heat exchanger flushing and maintenance.
  • • Circulation pump and gasket replacement.
  • • Boiler safety diagnostics.

Timing and warranty

  • • On-site diagnostics in Batumi.
  • • The price is agreed before repair.
  • • Careful work with gas equipment.

Example jobs

  • • Full technical maintenance.
  • • Temperature sensor replacement.
  • • Heat exchanger descaling flush.

Gas boiler failure causes

  • • Clogging, wear or dirt in working parts.
  • • Sensor, pump, heating, cooling or control-board failure.
  • • Installation issues, overload, humidity or limited access to the appliance.
  • • The exact cause is confirmed by on-site diagnostics.

Why the gas boiler fails

  • • The fault is narrowed down by symptom instead of replacing parts blindly.
  • • Error code, pressure, ignition electrode, burner, draft sensor, pump and heat exchanger are checked with safety first.
  • • Humidity, heavy use and access conditions in Batumi can make the symptom appear faster.
  • • The exact cause is confirmed during on-site diagnostics.

Gas boiler installation and connection

  • • Wall-hung boiler: mounted on brackets by level, heating system piped in.
  • • Electrics: stabiliser, a dedicated line, pumps and the expansion tank.
  • • The gas supply company does the gas hookup and first lighting — we prepare and pressure-test the system before their visit.
  • • After the gas crew: mode setup, a working check and a short briefing for the owner.

Local Batumi conditions

  • • We confirm model, access and symptom before the visit.
  • • Service covers central Batumi, Khimshiashvili, New Boulevard, Boni, Airport area and Angisa.
  • • Start-up, hot water and pressure stability are tested after service.

Gas water heaters (geysers) and tanks

  • • Gas geyser repair: no ignition, weak hot water flow, flame going out.
  • • Geyser heat exchanger descaling and maintenance.
  • • Electric water heater repair: heating element, magnesium anode, thermostat, gaskets.
  • • Same on-site terms and warranty as for boilers; Batumi and Gonio coverage.

How diagnostics works

A service-specific check sequence for this appliance.

1

Confirm the symptom, model and visible error code.

2

Error code, pressure, ignition electrode, burner, draft sensor, pump and heat exchanger are checked with safety first.

3

Agree the repair scope and parts before work starts.

4

Start-up, hot water and pressure stability are tested after service.

Brands and models

We work with common appliance brands. Exact repair options depend on the model and parts availability.

AristonBaxiBoschVaillantImmergasBerettaFerroli

Verifiable service terms

Only details the customer can see before or during the repair.

  • • Gas odor is treated as an emergency safety issue, not as a normal repair lead.
  • • If a licensed gas utility is required, the customer is told directly.
  • • Startup, hot water and pressure stability are checked after service.

Diagnostic scenarios in Batumi

These are service-specific repair scenarios, not invented statistics or dated jobs.

Scenario 1

Appliance: gas boiler

Symptom: Repeated gas boiler fault that needs targeted diagnostics.

Diagnostics: Error code, pressure, ignition electrode, burner, draft sensor, pump and heat exchanger are checked with safety first.

What we do: Clean, adjust or replace the confirmed failed part after approval.

Check result: Start-up, hot water and pressure stability are tested after service.

Time: 1-2 hours

Price guide: After diagnostics, usually from 70 GEL for labor

Area: Center / Khimshiashvili

Scenario 2

Appliance: gas boiler

Symptom: Unstable gas boiler operation after active use.

Diagnostics: Error code, pressure, ignition electrode, burner, draft sensor, pump and heat exchanger are checked with safety first.

What we do: Remove blockage/wear cause or agree part replacement after testing.

Check result: Start-up, hot water and pressure stability are tested after service.

Time: 1.5-2 hours

Price guide: After diagnostics, usually from 70 GEL for labor

Area: Boni / Airport area

Scenario 3

Appliance: Ariston gas boiler

Symptom: No ignition and no hot water

Diagnostics: We check pressure, ignition electrode, draft and display error.

What we do: Clean the electrode, test sensors and start safely.

Check result: The boiler starts without repeated error.

Time: 1-2 hours

Price guide: after diagnostics

Area: Khimshiashvili

Scenario 4

Appliance: Baxi gas boiler

Symptom: System pressure drops

Diagnostics: We check the circuit, expansion vessel and visible joints.

What we do: Recharge the vessel or identify the leak point for repair approval.

Check result: Pressure holds during the test run.

Time: 1.5-2 hours

Price guide: from 80 GEL

Area: New Boulevard

Scenario 5

Appliance: Immergas boiler

Symptom: Hot water temperature jumps

Diagnostics: We check flow sensor, heat exchanger and flame stability.

What we do: Clean accessible parts or approve heat exchanger service.

Check result: Water temperature becomes steadier.

Time: 1.5 hours

Price guide: after inspection

Area: Boni

Job photos

Typical on-site work scenes: diagnostics, access to components, and careful testing after repair.

Gas boiler repair in Batumi, New Boulevard
Gas boiler sensor check in Batumi, Khimshiashvili
Wall-mounted gas boiler diagnostics in Batumi

Detailed price table

Sensors and electronics

  • Temperature sensor replacement40–60 ₾
  • Electronic board replacement50–60 ₾
  • Draft safety sensor replacement40–60 ₾

Burner and ignition

  • Electrode replacement without burner removal40–50 ₾
  • Electrode replacement with burner removal40–100 ₾
  • Burner replacement50–80 ₾

Heat exchanger and hydraulics

  • Primary heat exchanger replacement120–150 ₾
  • Secondary heat exchanger replacementfrom 80–120 ₾
  • Circulation pump replacementfrom 80–120 ₾
  • Leak repair / gasket replacementfrom 50–80 ₾

Maintenance

  • Full cleaning and technical maintenancefrom 80–120 ₾
  • Heat exchanger descaling flushfrom 100–150 ₾

The final cost depends on the model, access to parts and spare part pricing.

FAQ

What if I smell gas?
Shut off gas, ventilate, and call emergency gas service. Common service areas include the city center, Khimshiashvili, New Boulevard, Boni, Airport area and Gonio.
Why does boiler pressure drop?
Leaks, air in the system, expansion vessel or valve faults can cause it.
Is boiler maintenance needed?
Yes. Burner, heat exchanger, pump and sensors should be checked to reduce seasonal failures.
Boiler or water heater won't start at all — what to check?
Check mains power and the breaker, that gas and water valves are open, and system pressure (usually 1–1.5 bar). If power and gas are fine but the display is dead or the unit locks out, a site visit is needed: likely the board, ignition electrode or draft sensor.
Who repairs and services gas boilers and water heaters in Batumi?
Tech Fix repairs and services gas boilers and geysers, including heat exchanger descaling. Daily 9:00–20:00, diagnostics 20 GEL, maintenance from 80 GEL. Batumi and Gonio coverage. Phone: +995 591 172 329.
How do I book an appliance technician in Batumi?
Call or message us on WhatsApp — the technician comes the same day, daily 9:00–20:00. On-site diagnostics cost 20 GEL, and the repair price is agreed before any work starts. We cover all Batumi districts and Gonio.

Related pages

Useful guides, prices and contact options for this service.

Gas boiler not igniting in Batumi

What to check when a gas boiler does not start: pressure, ignition, sensors, draft, burner, board and safety before calling a technician.

Open

Prices

Price list and diagnostic terms.

Open

Contacts

Phone, messengers and call-out area.

Open

Gas to electric conversion

Gas panel removal and electric hob installation.

Open

Common searches

gas boiler repair in Batumiboiler repair in Batumiboiler repair near meboiler repairs near megas boiler repairs in Batumigas boiler repairsgas boiler technicianfix a gas boilergas boiler maintenanceboiler not ignitingboiler not heating waterboiler pressure droppinggas water heater repair Batumiboiler servicing Batumiwater heater repair Batumiboiler won't startgas boiler installation Batumiboiler connection

Need gas boiler service?

Describe the symptoms and we will suggest the next step and price range.